Capture of the Quarter
Seen something special on the road? Then upload a picture to the 'Capture of…
Read the feature
Subscribe
Long-established abnormal load specialist Whitten Road Haulage is thriving on both sides of the Irish Sea transporting a diverse range of products including precast concrete beams
Transporting a precast beam that is 27.5 metres long and weighs 80 tonnes is no easy task. And doing it twice in two consecutive weeks between the Republic of Ireland and the UK is even harder. When the beams have a cast on parapet, it adds a layer of complexity to the operation, too, as it means that extendable trailers, or trailer combinations with turntables, aren’t suitable and a modular trailer needs to be used instead. But this is all in a day’s work – well, several days' work – for Whitten Road Haulage.
Starting out in Ireland, each load was taken to the port at Dublin and shipped over to Heysham. Then, over the space of a couple of days, the loads, carried on truck and trailer combinations measuring more than 37 metres, were escorted through Lancashire and West Yorkshire to their destination in Dewsbury, as part of ongoing work for Banagher Precast Concrete – one of Whitten’s longest-standing customers.
Of course transporting the beams is only part of the story. Arranging the shipping and liaising with police forces to sort out escorts takes time and some meticulous planning…





Bob Beech wonders if the new National Police Chiefs' Council guidelines will really lead to more consistent policing of abnormal loads movements around the country
One of the most contentious issues in recent years for almost everyone involved in the movement of abnormal loads in the UK has been the greater enforcement of regulations on the movement of these loads, and in particular the different interpretation and implementation of the rules in different parts of the country.
What is considered to be legal by the authorities in one area may not be allowed in others, and many operators covering large parts of the country have fallen foul of the authorities in such areas, despite trying their best to comply with all the rules and despite being given a green light to move the same load with the same combination in other areas. Another major area of concern is the imposition of blanket movement curfews for abnormal loads in an increasing number of areas.
Obviously, there must be a system to reduce the effects of slow-moving oversized loads on other road users, especially in the most congested and heavily populated parts of the country.



Bob Beech revisits Cadzow Heavy Haulage to find out why it has scaled its operation back recently and why it returned to Volvo for the latest addition to its fleet
It has been a while since HeavyTorque last visited family-owned Cadzow Heavy Haulage, based at Blantyre on the outskirts of Glasgow, and unsurprisingly, quite a bit has happened since we were last there.
Although company founder Jim Macauley passed away in 2016, his influence and foresight remain a big part of the operation. Fittingly, our visit coincided with what would have been his 80th birthday and the latest Volvo heavy tractor unit to enter service has been dedicated to his memory.
It was carefully specified by his grandson Jack Macauley Brailsford. Though a relative youngster, Jack has been involved in the operation for many years and has great respect for his grandfather, as well as many fond memories of him. The operation is headed, meanwhile, by Jim's daughters Elizabeth and Margaret, both of whom spent years working with their father.
Responding to changes in the market is key in specialist heavy transport, and Cadzow has done just this over the last year or two, reducing the size of the fleet and selling some of the heaviest modular equipment, which set the rumour mill…





Paul O’Callaghan meets Brian Grant, founder of one of Northern Ireland’s most prolific commercial vehicle operations, and his sons to find out more about their take on the business of specialised haulage and the company’s flagship DAF XG+
In Ireland, Dundrod is a place associated with motorbike racing – specifically the wild world of road racing. Since the 1920s, riders have sped along the seven mile course of the Dundrod Motor Racing Circuit in what is famous for being the fastest race of its kind. Peter Hickman set the lap record of 136.415mph in 2019, marginally faster than his record lap in the Isle of Man in 2024. Sadly, 2019 was the last year the iconic event was held, due primarily to increased insurance.
So what has this got to do with haulage, you may ask? Well, in Ireland, particularly in the northern end of the country, motorsport runs deep in haulage companies, and that’s certainly true of Brian Grant Haulage and Commercials, which is heavily connected to motorbike racing and rallying from its headquarters at Dundrod, in County Antrim.
Founder Brian is 77 years old with a mind as sharp, if not sharper, than those much younger. His propensity for recalling minor details is rather impressive and goes some way towards explaining just how so many various truck-related businesses operate from the one premises.



Family firm RL Taylor had its mettle tested when Scania proved reluctant to give it rear steel suspension on its new heavy haulage 8x4; and that isn't the only steel it had to show to get through the process, given some tragic family circumstances
Sustaining a heavy haulage operation in a rural area is never an easy task, especially if the fleet includes a couple of 150-tonne gross outfits.
Finding enough work in the area to justify the high levels of investment required can be difficult; some rural abnormal load carriers have to travel a long way from base to keep their vehicles busy. An inadequate road system, meanwhile, can create routeing problems and be hard on the trucks and trailers. Longer journey times and heavier fuel consumption have an impact on operating costs. And although traffic densities might be relatively low in some rural areas, there can be a huge increase in congestion in the summer months, often leading to embargoes for abnormal load movements at peak times. The best solution to the problem of finding enough work in the local area is, of course, to create your own. And that's exactly what Devon-based RL Taylor Heavy Haulage has done for some time now.
The firm has been involved in specialist heavy haulage for well over 45 years, gaining a reputation for providing top-quality service and running first-rate…





TII Scheuerle has designed a new side girder deck with new axle modules specifically for the transport of transformers
In collaboration with Spedition Kübler, TII Group subsidiary TII Scheuerle has developed a side girder deck with specially designed couplings for the transport of transformers.
Thanks to its low unladen weight, the STB 320 can achieve axle loads of as little as 12 tonnes with an overall payload of 320 tonnes, in its largest configuration.
The STB 320 modular platform should reduce the approval times and effort involved in moving such heavy loads, as complex and expensive bridge recalculations and inspections will not be necessary with such low axle loadings.
Though heavy haulage is clearly essential for the energy transition sector, ailing roads and bridges can pose major challenges for heavy hauliers like Spedition Kübler, from Michelfeld-Erlin in Germany.



At this year's Bauma exhibition, DOLL Fahrzeugbau presented a range of systems designed to make heavy haulage a little bit easier
DOLL Fahrzeugbau presented its latest vehicle solutions for heavy transport at the Bauma exhibition in Munich in April, showcasing a 3-axle low-bed trailer with DOLL tera pendular axle, a three-unit wind blade transport system, and a semi-trailer engineered for military operations in challenging terrain. It also took the opportunity to highlight the benefits of its vehicle refurbishment service.
The 3-axle low-bed with the DOLL tera pendular axle is aimed at applications requiring maximum ground clearance. With an axle stroke of up to 600mm, the driver can raise the loading platform to compensate for uneven terrain and different heights. At the same time, the pendular axle balances out uneven ground and keeps the vehicle level. The loading height can also be precisely adjusted to the load, to ensure compliance in terms of overall vehicle height. A steering angle of up to 60 degrees aids manoeuvring in the tightest spaces.
“When transporting heavy and oversized components or machines, every centimetre counts,” said Mathias Neumayer, product manager for heavy haulage at DOLL.

Scania has unveiled the newest member of its Super engine family with the launch of its new 11-litre version
Scania has launched the newest addition to its Super engine line-up, which has been designed to help operators increase payloads in weight-sensitive operations.
Positioned between its established 9-litre and 13-litre diesel units, the new Super 11-litre engine is up to 85kg lighter than the 13-litre unit and up to 7% more fuel efficient than the 9-litre equivalent.
Available in three power and torque ratings – 350hp /1,800Nm, 390hp/2,000Nm and 430hp/2,200Nm – the new engine has been designed to perform across a wide range of applications, from urban logistics to regional haulage.
Scania says up to 85% of the new Super 11-litre engine's components are shared with the Super 13-litre engine, while maintenance intervals are up to 30% longer than its 9-litre counterpart.



ALLMI delivers the latest news, views and events from the UK loader Crane sector.
In this edition: ILLAPG open day; Slinger/Signaller training; Surge in membership; Cs and AP training; GLAD 2025; MPBA partnership; BSI distributor status; EN 12999 amendment; and more.

We're all familiar with the name of the inventor of the ubiquitous diesel engine. But how much do you really know about his life? Patrick Versteeg has been doing some research...
I recently read The Mysterious Case of Rudolf Diesel, a book by Douglas Brunt. I can recommend it. There's much more to Rudolf’s story than I thought. The book reads nearly like a whodunnit.
The diesel engine, of course, has had a lot of bad publicity in recent years, but rather than getting mixed up in the heated debate about the pros and cons of diesel technology, I thought I'd look into the history and development of the diesel engine and learn more about the inventor behind it. And I certainly learned a lot from this book.
I previously knew only that Rudolf Diesel had invented the diesel engine and that the fuel used in it bore the same name. That always struck me as a bit odd, since we typically call the petrol engine just that, rather than referring to it as the Otto engine after its inventor, Nicolaus Otto. Despite his German-sounding name, Rudolf was born on 18 March 1858 in Paris. From a young age, he was a regular visitor to the Conservatoire National des Arts et Métiers, the oldest technical museum in Paris.


Seen something special on the road? Then upload a picture to the 'Capture of the Quarter' group on Facebook. All entrants that appear here win a copy of HeavyTorque and the winner gets a year’s subscription to the magazine
WE BRING YOU THE LATEST PHOTOGRAPHY COMMENDED BY HEAVYTORQUE. IF YOU’D LIKE TO SEE YOUR OWN IMAGES PUBLISHED WITHIN FUTURE ISSUES - THEN JOIN THE COTQ REVOLUTION TODAY!
www.facebook.com/heavytorque-cotq
HUGE CONGRAULATIONS TO ALL THOSE SHORTLISTED, AND OUR ANNUAL SUBSCRIPTION WINNER
PETER SUTHERLAND!





Seen something special on the road? Then upload a picture to the 'Capture of…
Read the featureBob Beech explores how King Group has broadened its offer, refined its trailer range…
Read the featureWe find out how Osprey delivered the UK’s first known electric SPMT move with…
Read the featurePeter McKenna examines how the collapse of West Midlands police’s mobile-crane prosecutions has sharpened…
Read the featureThree specialist titles. One essential weekly read.