Issue 40, October 2024 cover photograph
Cover story · From Issue 40

Autoplant

Suffolk’s lowloader heavy haulage specialist Autoplant has not stood still since we last interviewed the company at the turn of the decade. And not even the coronavirus could stop the business in its tracks. Chris Tindall takes a trip to Rendlesham to find out what’s new

Before her untimely death, the only qualified female pilot of the Spitfire, Carolyn Grace, would wheel out her warplane at Bentwaters Park where Autoplant is based and take it up for a spin. Autoplant’s MD Mike Green says each time she did this, his employees would stop what they were doing, transfixed by the guttural roar of the powerful Rolls-Royce engine searing a path through the skies. And then they’d all go outside and watch as the British classic looped and spun above their heads – which Green was more than happy for them to do. After all, it was a Spitfire; an endlessly thrilling sight for spectators old and new. There are no warplanes in the skies above the former airfield in Rendlesham, Suffolk when HeavyTorque pays a visit to find out how the plant and heavy haulage firm is getting on, five years after we last popped in. The only skilled aviator is our photographer, who’s commandeering a radio-controlled drone to take aerial shots of Autoplant’s new 170-tonne Volvo FH16 750.

Read the full feature
Three heavy-haul black Volvo trucks parked on tarmac, front truck centered with red-white chevrons.
Side-front view of the Autoplant truck with grab attachments in foreground.Low-angle close shot of an articulated tractor unit’s rear axles and coupling, showing Volvo and registration plate.Volvo FH Autoplant heavy haulage truck pulling a lowloader with a yellow Liebherr LTM crane inside a warehouse.
Tall rear-side view of the truck showing decorated cab roof and storage boxes against sky.Wide shot of the Autoplant truck and low-loader parked in the yard with excavators behind.
Fuchs MHL320 material handler on low-loader trailer being transported on a concrete yard with truck in background.
Autoplant
Operator · From Issue 40

Batters Heavy Haulage

Batters Heavy Haulage founder David Batters tells Bob Beech how he took the plunge and started out in business, how he ended up with his current three V8 Scania tractors, and why he’s happy to stick with a triaxle stepframe rather than anything heavier

While many specialist haulage operators have bigger, more complex and higher capacity trailers in their fleets, almost everyone has at least one 3-axle stepframe trailer in their line-up. And quite a few owner-drivers and small hauliers stick with them, rather than moving up the weight range, as the extra cost and complication of running heavier outfits are not always reflected in the rates customers will pay.

Many started out with a 6x2 tractor unit and triaxle stepframe, as the ability to work within construction and use regulations at up to 44 tonnes and then at heavier weights under STGO regulations provides a high degree of flexibility. Although the 44-tonne limit was introduced way back in 2001, it had a profound long-term impact on the light to medium-weight lowloader market. Trailer manufacturers quickly realised many operators would see that a relatively light but durable 3-axle stepframe trailer pulled by a suitable 3-axle tractor unit would be able to handle loads in the 14-24 tonnes range within the revised regulations.

Read the full feature
Three heavy-haul trucks parked in front of a dark metal shed under cloudy sky.
Low-angle close-up of tractors and two red haulage trucks parked in line, foreground trailer deck visible.Close-up of black Scania grille and protective bullbar with other trucks blurred behind.
Mechanic in orange overalls working beneath a vehicle with red trucks in background
Batters heavy haulage
Manufacturer · From Issue 40

Nooteboom Trading (Rino Trailers)

Nooteboom Trading founder and MD Igmar Nooteboom tells Bob Beech how he got started in the business of buying, selling, hiring out and refurbishing trailers, and what made the firm branch out into heavy-duty trailer manufacturing with its Rino brand

Wijchen, Netherlands-based specialist trailer maker Nooteboom Trailers has customers throughout the world. Its name comes from its founding family, another part of which runs a second but completely separate, and financially independent operation called Nooteboom Trading, based at Zeewolde, which also specialises in trailers. Igmar Nooteboom, the founder and MD of Nooteboom Trading, has been surrounded by specialist heavy transport trailers all his life, growing up in the industry. Many in the sector will also know his father, Dick Nooteboom, who was head of sales at Nooteboom Trailers for decades. Dick is one of the second generation that transformed the company from a relatively small Dutch manufacturer mainly serving its domestic market to a leading producer of specialist trailers with customers across the globe.

Although Igmar has had close contact with Nooteboom Trailers, spending a lot of time at the factory and visiting customers with his father, he has never worked for the company himself. Right from the start, he was determined to do his own thing.

Read the full feature
Circular inset (top): Igmar Nooteboom, md
Raised trailer deck and loading equipment under bright skyWide interior of a workshop with overhead crane and shelving, empty floorClose-up of trailer underside components and support leg
Truck cab covered in blue plastic inside a paint booth or workshop bayUnderside of a trailer showing multiple axle assemblies and suspension components.
Close-up side view of a trailer bed and wheel with Rino Trailers logo
Nooteboom trading (rino trailers)
Operator · From Issue 40

HC Wilson

HC Wilson is doubling the number of Volvos it has on its fleet with the addition of two FH16 750 8x4 tractor units which are being put to use moving heavy-duty machinery to and from mainland Europe

In the early 1960s, a modest but ambitious venture was launched from a farm in Haughley, Suffolk, by Hugh Wilson and his wife Marion. Initially a small-scale operation focused on agricultural contracting, HC Wilson Transport has shifted its emphasis more than a few times across the last 60 years.

It soon became active in hay and straw dealing, delivering to customers mainly in Wales. That led to the acquisition of the firm’s first truck, a second-hand Bedford O type, for a mere £60. This vehicle was used not only to transport hay and straw but also carried quarry stone on return trips, whetting an appetite for hauling heavier loads.

The company’s first brand new truck followed soon after – another Bedford, this time a KM model, in 1967 – before a difficult season for hay and straw forced HC Wilson into a new discipline: transporting agricultural machinery.

By 1969, the business had acquired a Guy Big J and three Bedford TK tractor units as it expanded its services across the whole of the British Isles, a move that came with a host of firsts for the firm.

Read the full feature
Red H.C. Wilson Volvo heavy-haul truck front three-quarter on wet yard.
Frontal view of red H.C. Wilson truck with trailers and tractors flanking it.Front-right three-quarter view of a red H.C. Wilson truck in foreground with another truck in background.
Close rear-side view of red heavy-haul truck showing multi-axle trailer and tank cargo.
Hc wilson
Nostalgia · From Issue 40

Mike Hetherington recalls

Retired Bertling Logistics technical director Mike Hetherington remembers a particularly challenging and convoluted job he took part in at the project forwarder back in 2004 involving a 200-tonne-plus condensate receiver

At the time of this project, Bertling had been awarded a massive contract to transport equipment and materials to the Caspian Sea for a big energy client. The project had put purchase contracts in place with suppliers all over the world on an FCA or ex-works basis so the responsibility to safely transport the cargo from point of origin lay with the client – and thus with its appointed project forwarder.

Many of items being moved were similar or identical to those of previous projects and the pre-carriage delivery to a port of export was a well-trodden path. There were, however, some items that were unique in terms of their size and weight, in particular a large condensate receiver. The first task was to identify possible export ports and potential routes to them. Being 23.2 metres long, 4.04 metres wide and 4.74 metres high and weighing 201 tonnes, transporting the condensate receiver from Parkgate in Rotherham to any port was obviously going to be an issue.

Read the full feature
Long low-loader truck carrying a large white cylindrical tank along a town street.
Yellow SARENS lattice boom crane lifting large cylindrical vessel onto barge while men in high-visibility gear guide itNicholson’s Guide showing Rawmarsh & Swinton area
Kilnhurst rail bridgeStudy of loaded barge for safe passingLarge heavy-load truck with long white cylindrical tank trailer on curving road at dusk
GCS Johnson Mercedes heavy haulage prime mover towing long multi-axle trailer carrying two large white cylindrical pressure vessels on a roadside turn.
Mike hetherington recalls
Operator · From Issue 40

Chris Wright (Baildon)

It's good to find someone as proud of what they do as Harvey King of heavy haulage and specialist installation firm Chris Wright (Baildon). Lucy Radley finds out what lies behind the glint in his eyes

There’s something almost starry-eyed about Harvey King, the relatively new CEO of specialist heavy haulage and installation firm Chris Wright (Baildon). It’s refreshing, especially in these tough times, to come across someone so obviously and genuinely impressed by what the company he’s leading actually does – so much so that Harvey launches straight into a slide-show of recent work at the start of our encounter, by the end of which we’re pretty darn impressed as well.

Chris Wright founded the West Yorkshire-based operator in the late 1960s along typical one-man, one-truck lines with a single V-registration DAF 18-tonner on general haulage. A DAF enthusiast from that vehicle forwards, his company now runs a fleet of 32, the vast majority of which bear the Dutch manufacturer’s badge.

80 years old this year, Chris is still very much involved in the business, although no longer tied up by the day-to-day running. That’s now Harvey's domain, and he's a man with a very different background. “I only joined the company in August last year,” Harvey tells us.

Read the full feature
White and red Chris Wright DAF truck parked in a dark warehouse with dramatic side lighting.
Low-angle close-up of a tracked excavator being loaded on a red trailer, worker in orange beneath it.Portrait-style shot of two men in high-visibility jackets standing in front of a white haulage truck.
Tight detail of truck front grille showing embossed "530" badge and honeycomb vents.
Chris wright (baildon)
News Spotlight · From Issue 40

TII Scheuerle | Spedition Kubler

HeavyTorque traces the four-⁠week-long move that saw 50-year-⁠old German submarine U17 moved to its new home at the Sinsheim Technology Museum

The movement this summer of submarine U17 from the Speyer Technology Museum in Germany to its sister museum in Sinsheim might just have been the highlight of the year for fans of heavy haulage.

Heavy haulage specialist Spedition Kübler transported the spectacular load overland on 30 Scheuerle InterCombi axle lines, negotiating numerous obstacles on the way and carrying out what is believed to be the world's first rotation of a submarine on a modular transporter, watched in person and online by tens of thousands as the 350-tonne submarine was transported to its new home over a period of four weeks. It was certainly a delicate undertaking, the 90 metre-long and 10 metre-high load having to pass under a number of low bridges and high-voltage power lines on the way, as well as along the narrow roads and streets of the hilly Kraichgau region. In order to pass safely under some of the obstacles, the sub had to be rotated by 70 degrees or more around its longitudinal axis using special equipment to position it to one side, reducing the overall height to achieve the required clearance.

Read the full feature
ADOPTING A SUB-CULTURE, photo 1-0
ADOPTING A SUB-CULTURE, photo 4-0ADOPTING A SUB-CULTURE, photo 1-1Type 206 submarine hull on multi-axle green Scheuerle trailer turning on a tree-lined road near trucks
Worker wearing a white hard hat labelled Frieder SAAM and red Kuebler Spediteur trousers standing beside a green truck.Multi-axle green Goldhofer heavy transport trailer with dozens of wheels carrying large cylindrical industrial vessel on roadway
A long transporter carries a dark submarine hull along a country road with U417 cut into a nearby harvested field.
Tii scheuerle | spedition kubler
News Spotlight · From Issue 40

Goldhofer | Zwatra

Dutch heavy haulage firm Zwatra has recently taken on 14 Goldhofer FT Series axle lines designed for extreme payloads

Specialist transport solutions supplier Goldhofer is celebrating the completion of its first order from Dutch heavy haulage firm Zwatra.

Zwatra, which boasts an extensive heavy haulage fleet and has a long track record in complex logistics operations, has recently taken on 14 axle lines from the Goldhofer FT Series, which was introduced at Bauma 2022 and is designed to handle extreme payloads.

Fitted with 285 tyres and supplied in a width of 2,750mm, the FT Series axle lines provide enhanced stability and safety for heavy haulage. The Zwatra order also included goosenecks and loading decks as well as various components for additional functionality, increasing the firm's options in the transport of a wide range of loads.

Goldhofer’s FT Series is a flexible solution for the heavy haulage sector. The base vehicle can be configured to individual requirements and system modifications can be made at any time, allowing users to respond quickly to changing market requirements and sustainably reducing overall operating costs.

Read the full feature
Goldhofer multi-axle lowloader parked outside Goldhofer workshop with cloudy sky overhead.
News Spotlight · From Issue 40

Faymonville WindMover Days

Faymonville Group has staged an in-house exhibition named WindMover Days to show its transport solutions for the wind power sector across its three group brands – MAX Trailer, Faymonville and Cometto

The wind power industry is in continuous development. And as offshore systems and wind farms grow in number and size, so too do the dimensions of the components they require and the transport challenges involved. To address them, Faymonville Group has staged WindMover Days, an in-house exhibition to highlight various solutions across its MAX Trailer, Faymonville and Cometto group brands.

Around 250 experts from the wind power sector came together over four days to take a look at its wares at the factory in Luxembourg. "All aspects and technical details of the exhibits were made available to visitors in detail," comments Rainer Noe, product manager at Faymonville.

The display incorporated all sorts of things, from lowloaders to flatbed trailers and from blade-lifters to tower adapters.

Among them was the WingMAX flatbed trailer. With a maximum loading platform length of 74.65 metres, this 4-axle trailer can handle the longest wind turbine blades.

Read the full feature
Faymonville WindMover trailer carrying a large wind turbine blade parked in front of industrial building
WIND CHIMES, photo 2-0Scheuerle SPMT modular platform with multiple axles parked on paved yard outside large warehouseWIND CHIMES, photo 2-5
Presenter addressing a crowd beside a yellow Faymonville WindMover modular trailer inside a factory hall.Audience seated in a Faymonville showroom watching a presenter and presentation slides about wind transport.
Guests seated at banquet tables inside Faymonville workshop with Yellow WindMover trailer and truck visible behind them
Faymonville windmover days
ALLMI Corner · From Issue 40

ALLMI Corner

ALLMI delivers the latest news, views and events from the UK loader crane sector.

In this edition: ALLMI website; ALLMI app; Crane supervisor training; ALLMI membership meetings; Industry careers; Slinger/signaller training; BS 7121 part 4 revision; Appointed Person training.

Read the full feature
ALLMI logo overlaid on a loader crane component with text about UK loader crane news and events.
European Ramblings · From Issue 40

Patrick Versteeg

Dutch driver Patrick Versteeg remembers a trip down to Spain to pick up a rather ropey trailer that needed taking to Northern France... and then back again

Some time ago, I was given the job of picking up a trailer in Valladolid, northern Spain, and dropping it in Trappes, near Paris, at a tarmac plant there. No rush, they said – you can take as long as you need. It would just be a case of bobtailing all the way from the yard in Holland to Valladolid, then dropping the trailer at its destination before bobtailing my way back home again. Should be a breeze, it seemed.

The trip from the Mammoet Road Cargo yard in Oudenbosch to the Spanish manufacturer was 1,550km, and seeing that it was a Thursday and I didn't have to be there until the following Monday, I could afford to take things slowly. So after stocking the fridge up with some neccessities, I set course for Spain in a Mercedes-Benz Actros MP3 2544 6x2 twin-steer.

It wasn't the most powerful truck I'd driven but in terms of fuel consumption, it was great. And so was its Megaspace cab. It was quite comfortable out on the road, thanks to the air-suspended cab – I never did get all the comments about the truck's suspension being too stiff.

Read the full feature
Man wearing sunglasses sitting in a red Volvo truck cab at the wheel looking out over a mown field.
TROUBLED TRAILER, photo 1-0TROUBLED TRAILER, photo 2-0
Competition · From Issue 40

Capture of the Quarter

Seen something special on the road? Then upload a picture to the 'Capture of the Quarter' group on Facebook. All entrants that appear here win a copy of HeavyTorque and the winner gets a year’s subscription to the magazine

WE BRING YOU THE LATEST PHOTOGRAPHY COMMENDED BY HEAVYTORQUE. IF YOU’D LIKE TO SEE YOUR OWN IMAGES PUBLISHED WITHIN FUTURE ISSUES - THEN JOIN THE COTQ REVOLUTION TODAY!

www.facebook.com/heavytorque-cotq

HUGE CONGRAULATIONS TO ALL THOSE SHORTLISTED, AND OUR ANNUAL SUBSCRIPTION WINNER

PAUL HENDY!

Read the full feature
PAUL HENDY
STEVEN DONALDJAMES LISMOREDAVE FURLONG

You might be interested

All features →
More from torque.news