ALLMI CornerHeavyTorque 47Pages 124–125
ALLMI DELIVERS THE LATEST NEWS, VIEWS AND EVENTS FROM THE UK LOADER CRANE SECTOR.
GLAD 2026
This year, ALLMI will again be a partner of the Global Lifting Awareness Day (GLAD) taking place on Thursday 2 July.
Read moreRead less
Running for its seventh consecutive year, GLAD is a collaboration between a range of organisations involved with lifting or working at height. It aims to promote the lifting industry, generally looking at good practice, compliance, innovation and recruitment, with particular emphasis this year on the subject of lifting equipment procurement.
BOARD APPOINTMENT
Antony Fensom of Leeds Commercial Vehicle Hire has been appointed to the ALLMI board.
Read moreRead less
The fleet engineer, who has over 35 years’ industry experience, said: “We joined ALLMI in 2010 and have seen membership add tremendous value to our business during that time. The training and technical resources available have been fundamental in helping us to build our reputation within the lorry loader sector and we are staunch advocates of the high standards developed and promoted by the association. I look forward to working with the board and like to think my current role and experience will allow me to bring a fresh perspective to discussions.”
BS 7121 PART 1 REVISED
Following discussions held by the industry panel tasked with reviewing BS 7121 Part 4, BSI made the decision last year to restructure the entire BS 7121 series.
Read moreRead less
While this undertaking will bring numerous benefits, one of its primary aims was to reduce duplication across the various Parts of BS 7121. And for this reason, Part 1 ‘Code of practice for safe use of cranes – General’ is being revised first, establishing a foundation for other related standards to build upon. ALLMI technical manager and chair of MHE/3/5 Keith Silvester, who is a member of the panel carrying out this work, said: “The Part 1 revision started in December, and we have been meeting fortnightly throughout this year. A great deal of early-stage tasks consisted of collating and organising previously recorded comments and ideas, as well as planning the project. With that addressed, the panel is now reviewing a number of important definitions and principles, agreement of which will provide a strong basis for future discussions, as well as fundamental threads that run throughout the 7121 series, ensuring consistency and alignment.”
The revision of Part 1 will continue throughout 2026 and will ultimately lead on to revisions for other parts including Part 3 (Mobile cranes), Part 4 (Lorry Loaders), Part 5 (Tower Cranes) and Part 7 (Bridge and Gantry Cranes).
COURSE DATES
ALLMI’s course dates are available for the remainder of 2026.
Read moreRead less
Being the UK’s only accrediting body to provide specialist training for each member of the lorry loader lifting team, as well as engineers, instructors and managers, the association’s courses are approved by CSCS and delivered to the highest standard. Courses available directly from ALLMI cover the roles of crane supervisor, appointed person, thorough examiner, manager – PUWER 9.2 and instructor. ALLMI training providers, meanwhile, supply courses covering lorry loader operators and slinger/signallers.
MEMBERSHIP BOOM
ALLMI’s 2025/26 financial year was one of its best ever on the new member front, with a raft of companies joining the association.
Read moreRead less
Those recently joining ALLMI’s fleet owner division include Barnsley-based C Soar & Sons UK, which provides specialist electrical plant recycling. The company’s senior project manager Ian Soar said: “Given C Soar & Sons’ long-standing and respected presence within the lorry loader industry, becoming a member of ALLMI was a logical step. We welcome the opportunity to draw on ALLMI’s expertise and support as we continue to strengthen our capabilities and stay informed of evolving standards and legislation. We are also delighted to join such an influential industry network and become part of the leading voice for the UK lorry loader sector.”
On the service company side, meanwhile, new members include L7 Lorry Loaders, part of Fassi UK’s authorised service network, which operates several mobile workshops out of Leamington Spa.
Its MD Dave Fripp said: “In terms of our personnel and in relation to training, our history with ALLMI goes back many years and so joining the association was a natural progression. While it was a rigorous process to confirm that we met the required high standards, it was also extremely constructive, and that positive experience has continued throughout our membership.”
Tom Wakefield, CEO of ALLMI, commented: “The industry understands the value of working with an ALLMI member and recognises the commitment to quality and standards that companies demonstrate through their association membership. Combined with the wide range of services and support we provide, this creates a highly effective model and is a key reason why we continue to see such strong levels of retention and growth.”
ALLMI provides membership for manufacturers and importers; installers; service companies; ancillary equipment suppliers; fleet operators; and site operators. Annual subscriptions start at £450.
EXECUTIVE COMMITTEE MEMBERS
Three new members have been elected to ALLMI's Operators’ Forum Executive: Dan Saunders of Travis Perkins, Kevin Buckler of Bimson Haulage and Nigel Cox of Eagle Plant.
Read moreRead less
ALLMI CEO Tom Wakefield said: “We are delighted to welcome Dan, Kevin and Nigel to the committee. Together with Nick Sesevic of Algeco UK, taking over as forum chairman, this election has seen the most substantial restructuring of the executive since its formation in 2006, and we look forward to working with the new committee to support the continued development of ALLMI’s fleet owner division.”
Following the election the Executive Committee consists of Nick Sesevic (chairman), Algeco UK; Andrew Packham, Sussex Transport; Dan Saunders, Travis Perkins; Kevin Buckler, Bimson Haulage; Mark Keily, Sunbelt Rentals; Nigel Cox, Eagle Plant; and Paul Bishop, Axle Haulage.
REMOTE DEMAND
ALLMI has published its loader crane industry sales figures for the second half of 2025, completing the market analysis for the full year.
Read moreRead less
One of the most notable trends was the continued high level of demand for remotes, with approximately 70% of invoiced sales relating to lorry loaders with control units of this type, and the figure rising to nearly 100% for cranes above 16 tonne/metre.
Although remote controls offer significant operational advantages, it is important to remember that their misuse can introduce potential hazards. To address this, ALLMI provides a range of free guidance material on the safe use of remote controls, including a web-based video, a toolbox talk, and an information leaflet designed for operators and their immediate supervisors. These resources can be accessed at allmi.com/safe-use-of-remote-controls.
TIMBER HANDLING GUIDANCE
ALLMI has added to its range of industry guidance notes with the publication of GN036 Timber Handling Cranes.
Read moreRead less
Produced in consultation with the ALLMI Technical Standards Committee, the guidance is primarily aimed at those who import, install, thoroughly examine or own and operate timber handling cranes, although it will also be of interest to anyone deemed a duty holder under LOLER or PUWER.
The guidance stems from the fact that under the Supply of Machinery (Safety) Regulations 2008 in Great Britain, and the Machinery Directive 2006/42/EC in the European Union where the majority of loader crane manufacturers are based, several exceptions are permitted regarding the design and construction of machinery.
European standard EN 12999 provides a means of compliance with these regulations and details specific exemptions for timber handling cranes, covering issues such as stability monitoring, rated capacity limiters, permissible sink rates, and signage. ALLMI technical manager and chair of the Technical Standards Committee Keith Silvester commented: “We are encouraging all relevant personnel to study the contents of the guidance note and adopt its recommendations where applicable. In particular, we are keen to highlight the various exceptions for this type of equipment, and that because of these, timber cranes should only ever be used for handling untreated timber in the forestry industry, not for general lifting operations.”
Guidance note GN036 is the latest in ALLMI's ever-increasing series of guidance notes, which spans various aspects of lorry loader use. They can be downloaded along with other good practice material from allmi.com/guidance.
Sign in to keep reading, free
Sign in for 3 free features a week, mixed across all three magazines. Already a subscriber, or want this issue on its own? Those work too.
Subscribe







