Issue 47, July 2026 cover photograph
Cover story · From Issue 47

Gallen Crane Hire

Kelvin Gallen is unapologetically passionate about lifting equipment and his impressive fleet of truck-mounted cranes is enough to raise anyone's spirits – as well as some very challenging loads

Over 25 years ago, Kelvin Gallen decided to quit his job driving a truck with a crane for a Dublin-based operator and, alongside his wife and business partner Fiona, set up on his own. He had been with his previous employer for a while and had become fascinated with truck-mounted cranes and just what could be done with them. Like many, however, he felt that he could do better working for himself. He had already built up quite a bit of experience and made several useful contacts, so he bought his first crane truck, a used Scania P93 M230 with a Cormach 16.5 tonne/metre crane.

These days, Kelvin runs one of the most impressive lifting, transport and installation operations anywhere, with a fleet of trucks, cranes and other specialist equipment to equal any other.

Gallens is, at its heart, very much a family affair. Kelvin and his wife Fiona work with their daughter Emily, sons Shane, Bradley and Sam, his father Kevin, his father-in-law Fergus, and a dedicated team of skilled staff, all of whom share the same enthusiasm and passion for cranes and other high specification equipment.

Read the full feature
LIFTING SPIRITS, photo 1-0
LIFTING SPIRITS, photo 4-0LIFTING SPIRITS, photo 5-0LIFTING SPIRITS, photo 8-0
Orange metal control box embossed GALLEN with coiled hydraulic and electrical hoses connected on truck bedUnimog U400 flatbed truck with Hiab crane parked beside excavator at equipment yard
LIFTING SPIRITS, photo 10-0
Gallen crane hire
Manufacturer · From Issue 47

Volvo Trucks

Both internal combustion and electric power are moving forward fast at Volvo, as a recent event in Gothenburg demonstrated

Volvo Trucks recently launched two all-new 13-litre engines, one diesel and the other gas-powered, and has promised to introduce a hydrogen-powered version of this design before 2030. At a launch event in Gothenburg, it also showcased its latest battery-electric vehicles (BEVs), offering greatly extended ranges and higher gross vehicle weights than previous BEVs. The truck maker also said that hydrogen fuel cell versions were undergoing testing and would be launched in 2030.

The new D13 engine replaces the current 13-litre Volvo unit fitted to the FH, FM and FMX models and the 11-litre engine in the FM and FMX ranges. While Volvo is investing heavily in battery-electric and hydrogen fuel cell drivelines, the introduction of the new diesel and gas-powered range shows that it believes internal combustion engines will remain at large for decades to come.

The outgoing D13, in single turbocharger and turbo-compound form, has earned a reputation for good fuel consumption, particularly when combined with the wind-cheating FH Aero cab range.

Read the full feature
Volvo FH truck front seen from above with illuminated headlights and suspended engine block labelled VOLVO.
Two teal Volvo FH Electric trucks passing beneath wildlife bridge with one truck following closelyVolvo truck D13 engine with large cooling fan and turbocharger on neutral background
Wide dark studio scene with Volvo truck front left and a suspended engine to the right.
Volvo trucks
Operator · From Issue 47

Global Crane Services

Heavy crane specialist Global Crane Services has invested in four new Scania XT 770S 8x4s to help position its heaviest mobile cranes wherever they are needed by the renewable energy sector and other customers

The north-east of Scotland has been heavily associated with energy and power generation since oil and gas were first extracted in large volumes from the North Sea in the 1970s, creating healthy demand across subsequent decades for specialist heavy transport and lifting services. And that, in turn, encouraged considerable development in transport and crane technology – not least in heavy mobile cranes and hydraulic modular trailers.

While the oil and gas sector has been in decline in recent years, rapid developments in wind and solar energy have led to continued demand for heavy lifting and transport in the area. This has created fresh challenges for specialist crane and haulage companies and given rise to the development of new techniques for lifting and moving wind turbine blades, hubs, nacelles and other components, especially given the steep hills, country lanes and even mountainsides that need to be negotiated to reach some rural wind farm sites.

Apart from setting up and maintaining such sites, another challenge in the renewables sector has been to establish the distribution grid…

Read the full feature
Front view of a large orange mobile crane framed by another vehicle’s chevron-patterned rear.
Three-quarter front view of a large orange mobile crane with extended boom sections stacked nearby.Front view of an orange-and-white Scania truck in a yard with cranes behind.Three-axle flatbed Scania truck parked in yard with equipment and reflections on puddles.
Three orange cranes parked in a row, low-angle view with blue sky.Front-on row of three orange-and-white Scania trucks parked side by side.
Three heavy-haul trucks lined up front-facing on an open yard with bare trees.
Global crane services
Vehicle Modification · From Issue 47

MACS Trucks

Mac’s truck sales has been powering ahead over the past decade, achieving an impressive eightfold rise in turnover and expanding its services beyond simple truck sales to vehicle rental, bodybuilding and crane equipment

For operators in the construction sector, using cranes is part of everyday life. Many look to use cranes, especially the larger ones, across a 360-degree field and to do this typically requires legs that go over the front of a cab. But a perennial problem is that usual solutions are not aerodynamic and add increased length to the vehicle.

The team at Mac’s Truck Sales has regularly encountered this problem and decided to do something about it. And after 18 months of engineering, testing and production by Mac’s Truck Sales’ in-house design team, a system has been produced for the DAF XG, XF and XD and Volvo FH Aero that solves the problem.

“We've worked directly with the manufacturers to create the patented design,” says Lewis Ramsden, marketing manager at Mac’s Truck Sales. “Essentially, now, the front legs can go behind the front grille of those trucks. DAF and Volvo have spent so much on making these trucks more aerodynamic and it defeats the object to put a massive block in front of them that destroys their aerodynamic benefits.

Read the full feature
IN MAC’S OVERDRIVE, photo 1-0
IN MAC’S OVERDRIVE, photo 4-0IN MAC’S OVERDRIVE, photo 6-0
IN MAC’S OVERDRIVE, photo 2-0
Macs trucks
Operator · From Issue 47

Aylward Heavy Haulage

Gaining the right knowledge and reputation to become one of the most successful operators in the heavy haulage sector takes time, as a recent visit to Irish firm Aylward Heavy Haulage aptly underlined

Making a move into the heavy end of the specialist transport market is a major step, given the huge investment and operational complexities involved. And anyone trying to do so will need a good record of working at lighter weights to be taken seriously, along with an ability to add lifting and installation to the services they offer. Typically, it's something that can only be achieved over a long period and in small steps. And that has certainly been the case at Ireland-based Aylward Heavy Haulage, where the process began in 1981 when founder PJ Aylward started as an owner-driver working in Ireland, the UK and mainland Europe with the support of his wife Marian, out of a base near Durrow in County Laois on the N77, roughly halfway between Dublin and Cork.

In the early 1990s, they invested in a stepframe trailer to move forestry equipment and machinery for a local branch of the state forestry body, gaining a reputation for reliability and for dealing with any problems that arose in those remote forest locations.

Read the full feature
Three red Volvo heavy-haul trucks parked on gravel under clear sky, one frontal and two behind.
Wide view of three red Volvo trucks parked in line on lot with trees behind.Red heavy flatbed truck carrying a huge blue cable reel in a yard.AYLWARD HEAVY HAULAGE | ROAD GOING IMAGES COURTESY OF LEAH O'CARROLL
DECADES IN THE MAKING, photo 8-0DECADES IN THE MAKING, photo 9-0
DECADES IN THE MAKING, photo 7-0
Aylward heavy haulage
Operator · From Issue 47

Notus Fagioli

Italian heavy transport and engineering specialist Fagioli is destined to become much more widely known in the UK after its recent tie-up with Notus Contract Lifting

Many in the UK will be unaware of the operational scope and capability of Italian-based Fagioli Group, despite it providing a wide range of heavy lift, specialist transport and associated services, operating throughout the world, and carrying out some of the most challenging projects possible.

Its services include almost every aspect of heavy transport, lifting, jacking, skidding, specialist installation and engineering, both on land and water. And two simple statistics hint at the scale of the Fagioli operation: the total number of self-propelled modular transporter (SPMT) axle lines in its fleet is over 2,000; and the upper weight limit for its jacking and skidding systems is currently 64,000 tonnes.

Fagioli started out as a family transport business in 1955, when founder Giovanni Fagioli began with just one truck in routine road transport, growing and gradually diversifying into heavier work.

Read the full feature
JOINING FORCES, photo 1-0
Stadium roof structure with multiple white arched steel masts and tension cables and cranes visible during construction.Array of tower cranes and suspended steel cables over stadium seating at a construction site under a clear blue sky
JOINING FORCES, photo 3-0
Notus fagioli
News Spotlight · From Issue 47

TII Scheuerle | Steil Kranarbeiten | Enercon

Three Scheuerle Bladelifters are currently in action delivering 60 wind turbine blades nearly 90 metres long to a site in Germany

A total of 60 rotor blades measuring 85.85 metres long are being moved to a wind farm in Bad Berleburg, Germany, in several stages with the help of three Scheuerle BladeLifter systems mounted on modular platform trailers with 16 axle lines.

The route is divided into three sections totalling some 45km. In the first two sections of 25km and 12km, the modular platforms are being towed, while on the final 8km section they are used in self-propelled mode. In towed format, the combinations are up to 103 metres long; in self-propelled form they cover 96 metres. Scheuerle's BladeLifter actively lifts and manoeuvres the rotor blades along the route, varying pitch angle between 21 and 46 degrees to allow obstacles such as trees to be safely cleared without modifying existing infrastructure or the surrounding environment.

The routes around Bad Berleburg are a tough challenge, with tight turns, underpasses, village sections and an aqueduct along a former railway line all requiring absolute precision, as well as numerous protected trees along the route.

Read the full feature
Steil Kranarbeiten truck labeled STEIL hauling a yellow Enercon wind turbine nacelle section on a forest road with workers guiding it.
Worker in hi-vis standing beside a trailer carrying a turbine blade through a narrow tunnel.BLADE RUNNERS, photo 1-0
TII Scheuerle modular multi-axle trailer carrying a long wind turbine blade being transported on a curved road near a service station.
Tii scheuerle | steil kranarbeiten | enercon
ALLMI Corner · From Issue 47

ALLMI Corner

ALLMI delivers the latest news, views and events from the UK loader crane sector.

In this edition: GLAD 2026; Board appointment; BS 7121 part 1 revised; Course dates; Membership boom; Executive committee members; Remote demand; Timber handling guidance.

Read the full feature
ALLMI logo overlaid on a loader crane component with text about UK loader crane news and events.
competition · From Issue 47

Capture of the Quarter

Seen something special on the road? Then upload a picture to the 'Capture of the Quarter' group on Facebook. All entrants that appear here win a copy of HeavyTorque and the winner receives an annual subscription to the magazine

IF YOU’D LIKE TO SEE YOUR OWN IMAGES PUBLISHED WITHIN FUTURE ISSUES - THEN JOIN THE COTQ REVOLUTION TODAY! PLEASE VISIT:

https://www.facebook.com/groups/HeavyTorqueCOTQ

HUGE CONGRAULATIONS GO TO ALL THOSE SHORTLISTED, AND OUR ANNUAL SUBSCRIPTION WINNER

DAVID POLLOCK!

Read the full feature
Close aerial perspective showing identical wind turbine tower sections on trailers moving along a narrow service road next to the M1 motorway.
Feature photo 1-2Feature photo 1-7
Feature photo 1-6
Capture of the quarter

You might be interested

All features →
More from torque.news