Issue 16, July 2025 cover photograph
Cover story · From Issue 16

Midhurst Engineering

Midhurst Engineering can trace its history back to the dawn of the motor age. But despite being a traditional, family-⁠owned business, it is always moving forward and investing in new areas of the recovery sector

You don’t get to be in business for more than 130 years without moving with the times. While Midhurst Engineering can trace its history back to the 19th century, its business has continually evolved, from repairing agricultural machinery at its outset to moving much more recently into heavy commercial vehicle recovery, in addition to its wider recovery and general vehicle repair services.

Based in Midhurst in West Sussex, Midhurst Engineering's move into commercial vehicle recovery has been driven by Jordan Morgan, who heads up the recovery side of the business.

“Heavy recovery is a passion of mine, and I wanted to move into it,” he says. However, to do that, he had to convince his dad, Guy, and grandad, Brian – the firm's managing director and chairman respectively – that the investment was worth it.

“We needed to spend money to see if we could make this work,” says Jordan. “But they trusted my judgement about going and buying a truck for this work – and it has paid off.

Read the full feature
Circular insets (top to bottom): Jordan, Brian and Guy Morgan
Large white recovery truck parked at an angle showing its side and rear under a cloudy sky.Two recovery trucks parked side by side in a yard with stacked cars and trees behind.White and red heavy rescue truck parked on concrete in front of wooden sheds under cloudy sky.
Three men in navy polo shirts standing in front of a pickup; younger man holds a small black-and-brown dog.
Front badges and signage of two Midhurst Engineering trucks
Midhurst engineering
Legislation · From Issue 16

STGO Guidance

As ever greater enforcement is brought to bear on the abnormal loads sector, Bob Beech suggests the recovery industry needs to ready itself for a similar uptick in scrutiny

As a matter of necessity, most heavy recovery operators forge strong and effective working relationships with the traffic police in their areas, in many instances working both for and alongside the police and other regulatory authorities when dealing with accidents, immobilised vehicles and other incidents.

Obviously, however, recovery operators are only in possession of the basic details of an incident until they arrive on scene.

Planning for the worst-case scenario has long been a hallmark of heavy recovery and fortunately, most modern heavy recovery vehicles are based on heavy-duty chassis that are specified with axles and chassis components that are also used in heavy haulage applications. This ensures the chassis have sufficient GVW/GTW and axle weight capacity to cope with most situations.

But things have not always been this way. Operators who have been in the industry for a long time will remember how it used to be when equipment was a lot less sophisticated and improvisation was often the name of the game.

Read the full feature
Low-angle close-up of a blue heavy truck parked outside a workshop, showing grille and license plate.
Two heavy recovery tractors coupled on yard with cloudy sky, wide viewBlue-and-white CMG recovery vehicle parked on motorway shoulder with blurred traffic
White box truck on a tilted recovery trailer outside a red-doored garage with signage.
Stgo guidance
Operator · From Issue 16

Rochford Garages

Bob Beech meets the third generation at County Durham-based Rochford's Garages, which has brought fresh focus back to the firm's roadside assistance and recovery operation after years of it majoring on its workshop activities

When you drive into the old mining village of Esh Winning in County Durham, one of the first businesses you encounter is Rochford's Garages. At first glance, it just looks like a well-established and well-presented village garage serving the local community, and you could be forgiven for thinking it runs a small fleet of recovery and roadside assistance vehicles for the local area and occasional longer-distance trips.

But you would be wrong. The company actually operates over 80 vehicles, from fully equipped service vans to a fully fledged fleet of roadside assistance and recovery vehicles. It also has a purpose-built heavy commercial vehicle workshop just a short distance from the original premises that provides full maintenance and repair services to many large fleets in the area and beyond.

The company has expanded considerably in recent years, mostly as a result of the younger generation of the Rochford family coming into the business.

Read the full feature
Front view of a Rochfords DAF truck parked outside a service garage under cloudy sky
Rochfords recovery flatbed truck loaded with a white car in a yardWhite recovery van parked on gravel showing front and side with ROCHFORDS branding.Front three-quarter view of a blue-and-white recovery truck with a car loaded on its deck at a yard.
Row of three recovery trucks parked in yard, photographed wide with sky above.
Wide shot of a recovery truck in yard with an operator walking toward a loaded trailer.
Rochford garages
Operator · From Issue 16

K2 Recovery

Northamptonshire’s K2 Recovery has built a solid reputation, providing a 24/7 service from its control room in Kettering as well as a workshop that operates around the clock

It’s the second highest mountain on earth, but it’s the most dangerous to ascend and even today it remains the preserve of only the most experienced climbers. So one of the first questions On Scene asks Dave Bown, owner of Kettering-based K2 Recovery, is why the vehicle recovery and repair company bears the same as what is often referred to as the ‘Savage Mountain’.

It’s an apt moniker in more ways than one. As well as symbolising toughness, perseverance and the risk of death in a challenging environment, the mountain was so-named simply because it was the second peak in the Karakoram range to be mapped by the Great Trigonometrical Survey in the 19th century.

For Dave, 2012 was also base camp; the start of a journey he might have thought twice about undertaking, had he known just how much resilience and grit was required to survive in this game.

There would also be a few novel twists and turns, but at the very beginning the mission was a simple one: to grow. This wasn’t too difficult, given that there was now a gap in the recovery market in the area.

Read the full feature
Two white K2Recovery recovery trucks parked at an angle under clear blue sky.
Worker in high-visibility jacket securing a red car on a flatbed truck.Worker in a helmet watching a recovery truck and crane at a yard.
Low-angle shot of two silver K2Recovery tractor units with power lines overhead.
K2 recovery
Operator · From Issue 16

JR Millington

If your excavator has ended up on its side at the bottom of a steep embankment, your bulldozer is stuck in an awkward part of a quarry, or your combine harvester has sunk into a quagmire, who are you going to call? Odds are it'll be J&R Millington

Based just outside Whitchurch in Shropshire, J&R Millington specialises in handling the most difficult off-road recovery tasks imaginable – and it does so all over the country and elsewhere in Europe. Recent jobs have included recovering a 60-tonne crusher which had suffered an engine fire from the top of a mountain of stones.

The company’s roots go back as far as 1898, explains Robert Millington, who runs the business alongside his son Joe. “My grandad Henry, who was always known as Harry, had a team of horses which was used to help pull portable steam engines,” he says.

The heavy engines were used to power threshing machines used by farmers and had to be moved across the countryside; by no means an easy task if the land was muddy or if the engine had to cross a peat bog. If the farmer’s own horses couldn’t cope, then Harry’s team was ready to help.

“We’ve still got the horse harnesses and brasses,” he says.

Read the full feature
Red tracked utility vehicle parked on a grassy bank, low-angle view showing full vehicle and sky.
Wider low-angle shot of the red tracked vehicle on a grassy mound, showing full profile.Excavator arm lifting a large striped metal counterweight across a yard.Wide view of winch frame in foreground with a truck parked in a grassy field.
Man pulling on a long bar attached to a tractor bucket inside a shed, another man near tractor.
Row of tractors and tracked digger parked on a grassy field under blue sky.
Jr millington
News Spotlight · From Issue 16

Scania

Scania has unveiled the newest member of its Super engine family with the launch of its new 11-litre version

Scania has launched the newest addition to its Super engine line-up, which has been designed to help operators increase payloads in weight-sensitive operations.

Positioned between its established 9-litre and 13-litre diesel units, the new Super 11-litre engine is up to 85kg lighter than the 13-litre unit and up to 7% more fuel efficient than the 9-litre equivalent.

Available in three power and torque ratings – 350hp /1,800Nm, 390hp/2,000Nm and 430hp/2,200Nm – the new engine has been designed to perform across a wide range of applications, from urban logistics to regional haulage.

Scania says up to 85% of the new Super 11-litre engine's components are shared with the Super 13-litre engine, while maintenance intervals are up to 30% longer than its 9-litre counterpart.

Read the full feature
Side view of a diesel engine with visible turbocharger and large cooling fan.
Scania inline engine assembly with visible turbochargers, flywheel housing and cooling fan photographed on plain background.Man wearing glasses and suit standing in front of a blurred Scania engine in studio.
Close-up of a Scania engine turbocharger and surrounding components in workshop setting.
Scania
News Spotlight · From Issue 16

Iveco | Fourwinds Garage

Cornish roadside assistance specialist says reliability was the key factor in its decision to base three more slide-bed recovery vehicles on the Japanese manufacturer's N-Series

Newquay-based Fourwinds Garage has taken delivery of three new Isuzu N75.190 recovery vehicles. The new arrivals replace similar trucks from another manufacturer and join a 25-strong vehicle recovery fleet that now incorporates eight 7.5-tonne Isuzu N-Series rigids.

Featuring custom low-approach slide-bed bodies from J&J Conversions, the latest three trucks to enter service will primarily be used by Fourwinds Garage to clear road traffic accidents and make long-distance vehicle deliveries.

The firm, which was established in 1988 and has been using Isuzu's 7.5-tonners for the last seven years, specialises in roadside recovery and repairs, working with The AA, Green Flag and Britannia Rescue, alongside a full range of additional maintenance, MOT and repair services.

Fourwinds Garage MD Dave Henwood said: “The most important thing for us when choosing a new vehicle is reliability, and our experience with Isuzu has shown its trucks will always deliver that – so much so that over the coming years we will be looking to transition the remainder of our 7.5-tonne models to the Isuzu N-Series.

Read the full feature
Four white flatbed tow trucks parked in a row outside a building with company signage.

You might be interested

All features →
More from torque.news