torque.news Subscribe
HeavyTorque

New MK 88 unveiled

Liebherr has launched the MK 88-4.2E mobile construction crane, designed to meet stricter global road limits and enter new markets. Series delivery begins in the second quarter of 2027.

By the torque.news newsroom 16 November 2026 3 min read
New MK 88 unveiled
New MK 88 unveiled

Liebherr has introduced a new four-axle mobile construction crane, the MK 88-4.2E, as the successor to the MK 88-4.1E. The model is being marketed under the slogan “Built for global roads”, with design changes aimed at meeting tighter axle and vehicle weight restrictions outside Europe.

Series delivery of the MK 88-4.2E is planned from the second quarter of 2027.

Lower axle loads, wider reach of markets

The crane can be configured for axle loads of 12 and 10 tonnes, and crucially it offers an option to travel on public roads with an axle load of under 9.2 tonnes and a gross vehicle weight of less than 36.3 tonnes. That specification should help with approval and road use in markets that enforce stricter limits than those in Europe.

Liebherr has fitted the MK 88-4.2E with 445/75 R22.5 tyres on aluminium rims. These wider tyres open access to further markets, including Australia, Denmark and the USA.

Chassis and ballast redesigned

While the boom system is largely carried over from the MK 88-4.1E, Liebherr has revised the crane chassis and counterweight layout to reduce axle loads. The counterweight is now split into several removable sections and the outrigger beams can be removed easily.

Self-ballasting is offered as an option. The counterweight can be fitted without an auxiliary crane, with a system monitored from the crane performing the lifts. Depending on the distance to the ballast transport vehicle, the crane lifts the counterweight onto the chassis in two or three stages. To allow the full ballast to be fitted and removed, ballast cylinders are integrated into the chassis, a new solution for MK cranes.

A new option permits electro-hydraulic operation while the crane is supported and ballasted on site. Using on-site electricity or an external battery pack, these set-up steps can be carried out locally with no CO2 emissions.

Electric options and power management

The MK 88-4.2E comes with a 16-Ampere mains connection as standard, alongside 32 and 63 Ampere options. This allows the crane to run on low-voltage site power at reduced speeds. Liebherr says the crane uses intelligent energy management and fully electric drives to adapt to different power situations.

The MK series uses a hybrid power concept that enables fully electric operation from site power or another external source. The cranes are compatible with Liebherr’s Liduro Power Port mobile energy storage system. If no external power is available, an efficient diesel generator provides self-sufficient operation.

Performance and manoeuvrability

The MK 88-4.2E retains proven components and crane technology from its predecessor. It offers maximum lift capacities of up to eight tonnes and a turning circle of 11.88 metres, aided by independent rear-axle steering. That makes the four-axle vehicle suitable for inner-city sites as well as larger industrial projects.

The crane has a maximum boom radius of 45 metres and can lift 2,200 kilograms at the tip. Liebherr’s Load-Plus control system can deliver automatic lifting-capacity increases of up to ten per cent.

Liebherr highlights the quiet operation possible when the crane runs on electric power, which can be an advantage for sites working at night.

Filed under Manufacturers

torque.newsroom

Seen something on the road? Send the newsroom a tip.

AdvertisementKraker Trailers

Related news

Buy the photographs

66,000 images and counting, ready to download.

Browse the gallery